Blue Star Power Systems · Diesel Product Line (Volvo Penta, 150 kW, Tier 4 Final)
New
Blue Star VD150-04FT4
150 kW standby · Diesel · Liquid-cooled
150 kW Tier 4 Final diesel standby/prime generator from Blue Star Power Systems. Volvo Penta TAD881VE 7.7L inline-six with SCR/DPF/DOC, DSE DCP7310 controller, 208-600V.
The Blue Star VD150-04FT4 is a 150-kilowatt EPA Tier 4 Final / EU Stage 5 diesel standby/prime generator built around the Volvo Penta TAD881VE — the Tier 4 Final version of the 7.7L inline-six block used in the Tier 3 VD230/250/275 models. This is a current-production active model.
The transition from the 5.13L TAD58xVE four-cylinder to the 7.7L TAD881VE six-cylinder reflects the step up in kW class — the additional two cylinders provide the displacement needed for 150 kWe with Tier 4 Final aftertreatment.
The TAD881VE is the Tier 4 Final version of the 7.7L engine family:
7.7L inline-six — same bore (4.33 in) and stroke (5.31 in) as the Tier 3 TAD851-853GE, with 17.2:1 compression ratio
SCR/DPF/DOC triple aftertreatment with 18.5-gallon DEF tank
6.4% DEF consumption — the highest ratio in the Blue Star T4F lineup at this kW class, reflecting the emissions reduction challenge at this engine loading
EPA Tier 4 Final + EU Stage 5 dual certification
4,921 ft altitude ceiling
Same 110 x 60 footprint as the VD100/125 models, but 650 lbs heavier (4,900 vs 4,250 lbs) due to the additional two cylinders and larger aftertreatment package
The TAD881VE shares its bore and stroke dimensions with the Tier 3 TAD851-853GE family, but the aftertreatment system adds meaningful service complexity. The DPF requires periodic ash cleaning, the SCR system requires DEF replenishment, and the DOC catalyst has its own inspection requirements. The 6.4% DEF ratio means roughly 0.69 gph DEF at full load — plan for DEF checks at every service visit. The 18.5-gallon tank provides adequate runtime for emergency standby, but prime power applications will need more frequent attention. The DSE DCP7310 controller monitors DEF level, aftertreatment temperatures, and regeneration status.#
Get pricing & lead time on the Blue Star VD150-04FT4
Tell us about the application — kW, voltage, application, install timeline — and we'll respond within one business day with budgetary pricing, lead time, and any sizing notes.
Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.
Estimate runtime on this tank
Estimated runtime
24.2 hours(1.0 days)
Fuel consumption ≈ 8.25 GPH at 75% load. Estimate based on industry-typical 1800 RPM standby curves (≈0.07 GPH/kW at full load). Actual consumption varies by engine, ambient temperature, fuel quality, and tuning.
Service intervals
Manufacturer-recommended intervals for the Blue Star VD150-04FT4 under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.
Oil & filter
Every 500 hours or 12 months
Coolant change
Every 6000 hours
Air filter
Every 1000 hours
Fuel filter
Every 500 hours
Major overhaul
≈ 20,000 hours
Load bank test
Every 12 months
Common failure modes
What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.
Component
Symptom
Typical hours
Severity
DEF system (SCR catalyst)
Derate warning, NOx fault, DEF quality alert
4,380+
moderate
Fuel quality
Injector fouling, hard starting
4,380+
moderate
Battery
Failed to start, slow crank
8,760+
minor
Frequently Asked Questions
What engine is in the VD150-04FT4?
The Volvo Penta TAD881VE — a 7.7-liter inline-six turbocharged-aftercooled diesel rated 252 HP (185 kWm) at 1800 RPM. This is the Tier 4 Final version of the 7.7L block used in the Tier 3 TAD851-853GE family (VD230-275 models), sharing the same bore (4.33 in) and stroke (5.31 in). EPA Tier 4 Final and EU Stage 5 certified with SCR/DPF/DOC triple aftertreatment.
How does the VD150-04FT4 relate to the Tier 3 VD230-01?
Both use the same 7.7L Volvo Penta inline-six block. The TAD881VE (VD150-04FT4) is the Tier 4 Final version of that same six-cylinder architecture, producing 252 HP with SCR/DPF/DOC aftertreatment, while the Tier 3 TAD851GE (VD230-01) produces 364 HP without aftertreatment. The VD150-04FT4 is rated at 150 kWe — lower than the Tier 3 model because the aftertreatment system and emissions controls reduce net available power.
Does the VD150-04FT4 require DEF?
Yes. DEF consumption is approximately 6.4% of fuel consumption — the highest DEF ratio in the Blue Star T4F lineup at this point. The 18.5-gallon tank provides roughly 27 hours of full-load operation.
What is the altitude deration for the VD150-04FT4?
Rated power is available up to 4,921 ft (1,500 m) at ambient temperatures to 122F (50C). Consistent with other Volvo Penta Tier 4 Final models in the Blue Star lineup.
125 kW Tier 4 Final diesel standby/prime generator from Blue Star Power Systems. Volvo Penta TAD582VE 5.13L inline-four with SCR/DPF/DOC, DSE DCP7310 controller, 208-600V.
Tier 4 Final3-phasecommercialsmall-commercial
B
Blue Star Power Systems
New
Blue Star VD200-04FT4
200 kW standby · Diesel · Liquid-cooled
200 kW Tier 4 Final diesel standby/prime generator from Blue Star Power Systems. Volvo Penta TAD1180VE 10.8L inline-six with SCR/DPF/DOC, DSE DCP7310 controller, 208-600V.
Tier 4 Final3-phasecommerciallarge-commercial
B
Blue Star Power Systems
New
Blue Star JD150-01
150 kW standby · Diesel · Liquid-cooled
150 kW Tier 3 diesel standby generator built by Blue Star Power Systems. John Deere 6068HF285 6-cylinder engine, Stamford UCI274/UCDI274 alternator, DSE DCP7310 controller.
Tier 33-phaselight-commercialcommercial
Need service or parts for the Blue Star VD150-04FT4?
We service every major OEM and stock genuine parts for the most common models.