Overview#
The Winco DR130F4 is a 130 kW standby / 123 kW prime diesel generator powered by an FPT Industrial N67-family 6.7-liter six-cylinder turbocharged diesel engine with a Stamford HCI 444 alternator. A three-phase-only unit (277/480V), it is among the largest models in Winco's enclosed DR diesel standby series. EPA Tier 4 Final certified. 100% US-made in Le Center, Minnesota.
At 130 kW, the DR130F4 serves facilities with significant commercial electrical loads — large buildings, healthcare facilities, and municipal infrastructure where reliable diesel standby is a code requirement.
The American Manufacturing Advantage#
At 130 kW, most diesel standby generators in this class use overseas engine platforms (Volvo Penta, MTU, or imported Cummins variants). The DR130F4 is different: FPT Industrial N67 — a CNH Industrial engine built in industrial facilities that serve global OEMs — paired with a Stamford HCI-series alternator, assembled entirely at Winco's Le Center, Minnesota facility.
For healthcare systems, universities, and government agencies subject to Buy American Act provisions, the DR130F4 provides 130 kW of US-manufactured standby infrastructure. The FPT N67 engine is distributed globally through Case IH, New Holland, and independent diesel dealers — parts availability is strong, and service does not require a dedicated Winco dealer.
Service & Maintenance#
Oil and fuel filter changes every 500 hours or annually. At 130 kW, the N67 six-cylinder engine has a larger oil capacity than mid-range four-cylinder platforms — budget accordingly for consumable costs. Standby fuel degradation makes the annual change interval mandatory regardless of hours logged.
The Stamford HCI-series alternator requires periodic brush, bearing, and insulation inspection — standard tasks for commercial generator technicians. Transfer switch contacts should be exercised weekly. Major overhaul at 20,000 hours.
Our Service Experience#
PowerGen services Winco DR units throughout the Bay Area and Northern California. At 130 kW, the DR130F4 is in a class where Cummins, Caterpillar, and Kohler dominate. Winco's advantage is specific: US manufacturing and non-proprietary components for clients with procurement requirements that the major brands cannot satisfy. Our service capability on the DR130F4 matches that of any major-brand diesel standby — FPT Industrial and Stamford parts come through standard commercial generator supply channels.
