Cummins · Cummins QuietConnect RS Series

Cummins RS50

50 kW standby · Natural Gas / LPG · Liquid-cooled

50 kW liquid-cooled residential standby generator. Natural gas or LP, field selectable. 5.9L inline 6-cylinder, 1800 rpm, 72 dB(A) at 23 ft, 180 mph wind rated, PowerCommand 1.1 controls.

Cummins Cummins RS50 generator — specifications and details
Standby power
50 kW
Voltage options
120/240V, 120/208V, 277/480V
Frequency / Phase
60 Hz · 1/3-phase
Engine
Cummins QSJ5.9G · 5.9L
residentialsmall-commercial
Configure & Quote

Overview#

The Cummins RS50 is a 50 kW liquid-cooled residential standby generator from the QuietConnect RS Series. It marks the transition from the compact 2.4-liter 4-cylinder platform to the larger 5.9-liter inline 6-cylinder engine (QSJ5.9G), providing significantly more power and motor starting capacity for estate homes and large residential properties.

The RS50 runs on natural gas or propane vapor (field selectable) at 1,800 rpm and produces 72 dB(A) at 23 feet with the powder-coated aluminum Sound Level 1 enclosure. The enclosure is wind-rated to 180 mph per ASCE 7-10 and the unit is equipped for cold weather starts down to -40 F with factory accessories. An 850 CCA battery at 0 F is required.

At 2,403 lbs and 118.7 x 40.0 x 58.3 inches, the RS50 is a substantial unit that requires proper structural support and adequate clearances. PowerCommand 1.1 controls provide electronic governing, self-diagnostics, and flexible exercise scheduling.

Technical Specifications#

ParameterValue
Standby Rating50 kW
Voltage (1-phase)120/240V
Voltage (3-phase)120/208V, 277/480V
Frequency60 Hz
Engine ModelQSJ5.9G
Displacement5.9 L
Cylinders6 (inline)
AspirationNaturally aspirated
Rated Speed1,800 rpm
CoolingLiquid-cooled
Voltage Regulation±1%
Frequency Regulation±0.25%
ControllerPowerCommand 1.1
Sound Level72 dB(A) at 23 ft (7 m)
Dimensions (L x W x H)118.7 x 40.0 x 58.3 in
Weight2,403 lbs
Battery Requirement850 CCA at 0 F
Fuel Pressure1.5-3.5 kPa (6.0-13.0 in H₂O)
Wind Rating180 mph (ASCE 7-10)
Cold Weather-40 F (with factory accessories)

Our Service Experience#

The RS50 is the entry point for the 5.9L engine platform in the QuietConnect residential lineup. The QSJ5.9G engine is well-proven across thousands of residential and light commercial installations nationwide. It is mechanically similar to the commercial C-series generators (C60 N6 through C100 N6), giving us deep field experience with the platform.

Service intervals are 500 hours or annually for oil and filter, 500 hours for air filter, 1,000 hours for spark plugs (all 6 cylinders), and 30,000 hours for major overhaul. The coolant system requires annual testing and periodic replacement. Fuel pressure at the engine inlet must be verified under operating load -- minimum 6.0 in H₂O, maximum 13.0 in H₂O.

The most common maintenance issue on 5.9L QuietConnect units is spark plug condition. With 6 cylinders there are more plugs to manage, and gas engines are more sensitive to plug condition than diesel. We recommend inspecting plugs at every annual service and replacing the full set at 1,000 hours.

Frequently Asked Questions#

What is the standby rating of the RS50? 50 kW, available in single-phase (120/240V) and three-phase (120/208V, 277/480V) configurations.

How does the RS50 compare to the RS40? The RS50 uses a 5.9L inline-6 (2,403 lbs) vs the RS40's 2.4L turbo inline-4 (1,356 lbs). The RS50 provides 25% more power and runs naturally aspirated (no turbocharger to maintain). The trade-off is significantly more weight, larger footprint, and higher fuel consumption.

What is the warranty on the RS50? 2-year factory warranty from Cummins. Extended options available through authorized dealers.

Engineering specifications

Physical

Length
118.7 in
Width
40 in
Height
58.3 in
Dry weight
2,403 lb

Ready to order this model?

Configure your Cummins RS50

Lock the enclosure, fuel system, transfer switch, and add-ons — we'll confirm pricing, availability, and lead time within one business day. Prefer a free-form quote? That option is still here.

Estimate runtime for the Cummins RS50

Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.

Estimate runtime on this tank

Fuel demand at 75% load

525,000 BTU/hr525.0 cf/min @ 1,000 BTU/cf

On utility natural gas the runtime is generally unlimited provided the supply line and meter can deliver this BTU/hr at the engine's required inlet pressure (typically 5–14" WC residential, up to 5 psi commercial). Confirm against the OEM's published fuel-pressure spec.

Service intervals

Manufacturer-recommended intervals for the Cummins RS50 under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.

Oil & filter
Every 500 hours or 12 months
Air filter
Every 500 hours
Spark plugs
Every 1000 hours
Major overhaul
30,000 hours

Common failure modes

What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.

ComponentSymptomTypical hoursSeverity
Spark plugs (6 cylinders)Misfiring, rough idle, check engine lamp, elevated emissionsminor
Battery (12V)Fail-to-start event, slow crank, low battery voltage warningminor
Coolant level / hosesLow coolant level alarm, coolant leak, overtemperature shutdownmoderate
Fuel regulator / air-fuel mixerRich or lean condition, unstable idle or poor transient responsemoderate

Frequently Asked Questions

What engine does the Cummins RS50 use?
The RS50 uses the Cummins QSJ5.9G -- a 5.9-liter, naturally aspirated, inline 6-cylinder engine running at 1,800 rpm. This is the same engine family used in the RS50 through RS100 QuietConnect models.
How loud is the RS50?
The RS50 produces 72 dB(A) at 23 feet (7 meters) with the Sound Level 1 enclosure. Sound Level 2 enclosure upgrades are available for reduced noise levels.
What control system does the RS50 use?
The RS50 is equipped with the PowerCommand 1.1 electronic controller with self-diagnostics, programmable exercise scheduling (as short as 2 minutes every 6 months), and remote monitoring capability.
What is the warranty on the RS50?
The RS50 comes with a 2-year factory warranty from Cummins. Extended warranty options are available through authorized dealers.
Can PowerGen service the RS50 in Northern California?
Yes. PowerGen provides Cummins generator service across the San Francisco Bay Area, Silicon Valley, and Northern California. The QSJ5.9G is one of the most field-common gas engines in our service area.

Similar models

Cummins Cummins RS60 60 kW liquid-cooled standby generator

Cummins

Cummins RS60

60 kW liquid-cooled standby with Cummins 5.9L inline-6 engine. 250 amps at 120/240V, 69.8 dB quiet operation, and PowerCommand 1.1 controls.

60 kW standby · Natural Gas / LPG · Liquid-cooled

60 kW liquid-cooled residential standby generator. Natural gas or LP, field selectable. 5.9L inline 6-cylinder, 1800 rpm, 69.8 dB(A) at 23 ft, 180 mph wind rated, PowerCommand 1.1 controls.

3-phaseresidentialsmall-commercial
Cummins Cummins C60 N6 60 kW liquid-cooled standby generator

Cummins

Cummins C60 N6

60 kW natural gas with full Cummins vertical integration. QuietConnect-class sound levels. No diesel storage needed.

60 kW standby · Natural Gas / LPG · Liquid-cooled

60 kW natural gas/propane standby generator with Cummins QSJ5.9G 5.9L inline-6 engine. PowerCommand 1.1 control, UL 2200 listed, NFPA 110 Level 1 capable. Sound-attenuated aluminum enclosure.

EPA Stationary Spark Ignition3-phasecommercial-standbyretail
Cummins Cummins C80 N6 80 kW liquid-cooled standby generator

Cummins

Cummins C80 N6

80 kW natural gas with full Cummins vertical integration. QuietConnect-class sound levels. No fuel storage permits.

80 kW standby · Natural Gas / LPG · Liquid-cooled

80 kW natural gas standby generator with QSJ5.9G engine. PowerCommand 1.1 controls, UL 2200, IBC Seismic, NFPA 110 capable. Quiet Connect RS80 series in sound-attenuated aluminum enclosure.

3-phasecommercial-standbylight-commercial-standby

Need service or parts for the Cummins RS50?

We service every major OEM and stock genuine parts for the most common models.